Specific overview of the scraping method of marine bearing bush
Time:
2022-01-10 13:38:25.196
The marine bearing bush is the contact part between the sliding bearing and the journal. The shape is a tile-shaped semi-cylindrical surface, which is very smooth. It is generally made of anti-wear materials such as bronze and anti-friction alloys. This time, the supplier of the bearing bush specifically introduced the shaving method of the marine bearing bush.
The supplier of the bearing bush introduced that there are two types of marine bearing bushes: integral type and split type. Integral marine bearing bushes are usually called bushings. There are two types of integral marine bearing shells: no oil groove and oil groove. The bearing bush and the journal adopt clearance fit, and generally do not rotate with the shaft.
The marine bearing bush is an important part of the bearing. It is very smooth and is usually made of bronze and anti-wear alloy anti-wear materials. The marine bearing bush has the force exerted by impurities to maintain the stability of the oil film. In addition, the marine bearing bush reduces friction.
Marine bearing need to contact the tile and tile cover, the bearing seat in contact with the marine bearing surface tile force is greater than 70 percent, not more than 60 percent, the contact area and uniform distribution. Before the standard arrives, the back of the tile is cut back for training. The fixed pin end of the fixed sliding bearing should be installed 2 to 3cm from the bearing body, and the tiles of other axles and marine bearings should be assembled. The connecting bolts of tiles and tiles should be fixed and evenly distributed.
Previous Page
Mobile Version
SENHAI MARINE CO.,LTD.
Contact Person: Mr. Jason
Telephone: 86-513-81005598
Telephone: 86-15962843638（24h）
Email：info@senhaimarine.com
Email：ut@senhaimarine.com
Email：safety@senhaimarine.com
Email：supply@senhaimarine.com
Email：ship@senhaimarine.com
Address: No.38, Fumei Road, Chongchuan District, Nantong City, Jiangsu Province